Manual Defibrillator DM7000 - Advanced - SPO2, NIBP And Pacing With Printer

 

Features & Specifications:

 

Defibrillator:

• Waveform: Biphasic
• Charge Time: Less than 7 seconds with a new fully charged battery
• Energy Display: Monitor display indicates both selected and delivered energy.
• Charge Prompt Type: Voice and visual prompts.
• Impedance Range: 0-250 ohms.

 

ECG Monitoring:

• Patient Connection: 3-lead ECG cable, or 5-lead ECG cable, paddles.
• Lead Selection: Displayed on monitor, paddles, I, II, III, AVR, AVL, AVF, V
• ECG Size: 0.25, 0.5, 1, 1.5, 2, 4 cm/mV displayed on monitor.
• Heart Rate: 20-300BPM.
• Heart Rate Alarm: On/Off displayed on monitor, user-selectable.
• Smart Alarms: Beeper/voice prompts indicate shockable rhythm.

 

Battery:

• Type: Rechargeable, Ni-MH battery, 12V.
• Operating Time: For a new, fully charged battery: 100 defibrillator discharges, or 3 hours minimum of continuous ECG monitoring. Additional parameters will effect operating time with different functions.

 

Display:

• Screen Type: High-resolution display
• Screen Size: 7 inch (17.7 cm) diagonally
• Sweep Speed: 25mm/sec
• Information: Heart Rate, Lead/Pads, Alarm On/Off, SpO2, NiBP, AED Functions and Prompts, Alarm Selection and Limits, Delivered Energy.

 

SpO2 Module:

• Measurement Range: 30~100%, ±2% between 80%~90%, others ±5%
• Alarm Range: User set high limit and low limit.
• Alarm Accuracy: ±10% within setting values
• Alarm time Accuracy: less than 12 sec.

 

Recorder:

• Paper: 50mm thermal.
• Speed: 12.5mm/sec, 25mm/sec, 50mm/sec. User-selectable 6-second delay.
• Printing Method: High-resolution, thermal print head
• Print-out Modes: Manual or automatic, user-configurable.
• On/Off Control: Front panel and paddle.
• Automatic Function: 9-seconds recording initiated by alarm activation or defibrillator charge or defibrillator discharge.

 

AED Mode:

• AED Function: Auto analyse and charge x3 with programmable auto energy level selection, screen prompts, and voice prompts.
• Shockable Rhythms: Ventricular fibrillation with amplitude >=200uV, ventricular tachycardia with rates >=140bpm, and QRS complex wave duration >=140ms
• Charge Control: Control on device front panel, press key on paddle.
• Prompts: Voice and visual prompts.

 

Manual Mode:

• Energy Selection: Selectable at 2, 5, 7, 10, 20, 30, 50, 70, 100, 150, 200, 300, 360 joules.
• Synchronized Mode: Synchronizes defibrillator pulse to patient’s R-wave. ”SYNC” message displayed on monitor

 

NIBP

 

Pacer:

• Type: VVI demand; asynchronous (fixed rate) when in ASYNC pacing mode
• Pulse Type: Rectangular, constant current
• Pulse Aplitude: 0 to 180 mA ± 10% or 5 mA (whichever is greater).
• Pacing Rate: Variable from 30 ppm to 180 ppm ±1.5% (increments or decrements by a value of 2 ppm)
• Multi-Function Electrode (WFE) Pads: Multipurpose Defibrillation/Pacing Electrodes
• Pause: Pacing pulse frequency reduced by a factor of 4 when activated
• Refractory Period: NC (VVI demand does not have this specification)
• Pulse Width: (20+1.5 ms)
• Output Protection: Fully defibrillator protected and isolated